Easy Window Glass Terminology
You do need to know basic terminology about windows and how many kinds are available, all the while you need not be an expert.
Picture windows are stationary windows that add views and value. They are flanked by units or narrow casements.
Tilt-in hopper windows are installed in crawlspaces and basements. The sash locks when unlatched and the top tips in toward the interior.
The name Float glass is the process of forming molten glass. It floats molten glass on the molten tin, creating a possible thin glass panel. This is a simple sheet of glass before it is cut, treated, upgraded, and set into a frame. A starting material for your own window.
Safety Laminated Glass
Laminated glass is an extra-strong, security-enhanced glass created by fusing at least two panes around an interior layer of PVB (polyvinyl butyral). This process utilizes a pressure fusion procedure and high heat to create a super-strong panel. If you require glass to remain put in the frame if it is broken, for safety or security reasons, this would be among your best choices.
You cannot see through an Obscured glass, although it is clear. Obscured glass patterns might be frosted, etched, coated, or otherwise designed so you can’t look through or see further than vague outlines or shadows of what’s behind it. That is why this is the most popular type of glass for bathroom windows, shower doors, and entry door areas.
Annealing is the controlled, meticulous, and slow process of cooling a panel of float glass. By reducing the stress caused to it by quick cooling, the objective of this process is to strengthen the glass, which is the next step for float glass, and further upgrades can be accomplished.
Heat Strengthened Glass
Heat Strengthened Glass To create annealed glass panels twice as hard, it is reheated above 1200 degrees and then cooled. It’s not cooled quite as fast as tempered glass, so it’s not as powerful.
Tinted glass is added. This can be done for many reasons, including design aesthetic, privacy, and reducing heat from sunlight. Tinted glass may be a form of protection against harmful UV rays.
You usually see tinted glass on vehicles, skylights and decorative panels, but you can also use it for outside windows to bump your privacy factor and reduce harmful UV rays on a particular side of the house.
The tempering process takes place only after the glass is finished and is cut into size. Tempered glass cannot be trimmed. The glass is heated to over 1200 degrees and then cooled. And to make heat-soaked tempered glass, the panes are baked at 550 degrees.
Having glass tempered makes it break in a particular manner that is safer than annealed glass. You are most likely to have tempered safety glass in your vehicle so that you can break the window out in case of a crisis.
Insulated glass windows come in a unit that is optimized for energy efficiency. There are two or three panes of glass, with argon gases in the spaces between the panes. An insulated glass unit also has a desiccant component, ensuring that condensation won’t form in between the panes in which you can not wash off.
Insulated glass windows are an excellent choice for exterior glass that’ll help you keep your heating and cooling costs down.
This coat is sealed with an additional coating, creating a mirror effect. You usually find mirrored glass being used in a decorative capacity, like on walls, furniture, and doors. Low-E Glass, Low emissivity glass is coated to reflect thermal radiation.
Why is this so beneficial for homes during the summer?
Heat is directed away from your property; in winter, your indoor temperature reflects back into the house without escaping through the windows. That translates to reduced heating and cooling expenses. Low-E glass may be a costly investment, but the savings, in the long run, can make it worthwhile.
Wired Glass Cable
Wired glass isn’t always considered a security glass. However, it is a fire-resistant glass. That is why it’s most widely utilized in schools, hospitals, and other industrial buildings. The grid of wires built into the panes will hold the glass in the frame if it shatters under high heat, such as a building fire.